Over many years Aspiring has refused to compromise on the principle of a stable hanging position which underpins our climbing harness designs. By rethinking the standard climbing harness design, Aspiring has come up with an innovative but still familiar product which retains the stable hanging position. Careful development and extended trials have shown that the Stratos harness excels in comfort and performance.
Fixed Belay Loop -Retains attachment geometry at all times, keeping attachment point high during abseils and falls to prevent inversion
Prevents see-sawing of the leg loops through the belay loop, minimising rubbing on this quick-to-wear point
Waist strap slides horizontally through belay loop to assist with centering gear loops16cm range in waist belt size
Five gear loops, two on each side and one at rear
Overlapping gear loops to bring second gear loop closer to the front
Gear loop strength over 3kN – sufficient to hold bodyweight should a novice mistakenly clip into a gear loop
Ultra Comfortable Leg LoopsErgonomically shaped leg padding to minimise harness bulk between legs
Weight in leg loops is distributed through two webbing straps for extra comfort and support
Fully adjustable leg loops with elastic to promote full range of hip movement
Made Strong and Robust
Overall strength in excess of 22 kN (tested to 22.5 kN without failure – 1½ times the European standard EN12277)
Wear points are protected by webbing not fabric
Belay loop is lined with webbing to protect it from wear
Belay loop has no raw webbing edges exposed
High-density New Zealand-made foam in leg loops and waist belt
Lightweight at 425 grams
Please make your selections.